EMALTUS integration pack
Sent by an engineer after a short qualification.
Integration module
EMALTUS
EMAT measurement module for integration into a third-party aerial platform, delivered with a defined integration envelope and responsibility split.
EMALTUS
1920 × 1080
EMALTUS in operation: real aircraft, sensor in contact with a coated steel surface
Poster frame for the hero video. Real hardware, never CGI. One frame must show the contact point and the thickness value on the operator screen together.
media placeholder
1920 × 1080
Hero video, 10-12 s
Approach, contact, value on screen. Autoplay muted loop, no music, under 4 MB for web, separate 9:16 mobile crop.
media placeholder
1.4 kg
Module mass
Sensor, mast and controller
22 – 26 V
Input voltage
DC, platform supplied
90 W
Peak power
During acquisition
Why the module exists
Demo narrative. Operators who already fly a certified platform need the measurement capability, not another aircraft. Every figure on this staging site is invented.
Integration
Integration Envelope
| Specification | Value | Condition | Note |
|---|---|---|---|
| Module mass | 1.4 kg | no condition recorded | Sensor, mast and controller |
| Physical envelope | 180 × 140 × 120 mm | no condition recorded | Excluding mast travel |
| Mounting | 4 × M4 | no condition recorded | 90 × 90 mm pattern |
| Input voltage | 22 – 26 V | no condition recorded | DC |
| Peak current | 4.0 A | no condition recorded | During acquisition |
| Communication | UART, CAN | no condition recorded | Message set documented in the integration pack |
| Approach geometry | ±20 deg | no condition recorded | Sensor to surface |
| Sensor positioning tolerance | ±2 mm | no condition recorded | Platform hold accuracy required |
Responsibility Matrix
| Integration area | ALTCER | Customer / integrator | Notes |
|---|---|---|---|
| Mechanical mounting | Supplies mounting pattern, mass and envelope data. | Designs and certifies the mechanical interface. | |
| Power | States voltage and peak current. | Provides conditioned power within the envelope. | |
| Flight control | Defines the hold accuracy the measurement needs. | Achieves and verifies that hold accuracy. | Positioning is the integrator responsibility. |
| Measurement data | Provides the acquisition module and message set. | Handles storage and downstream processing. | |
| Airworthiness | None. | Owns platform certification and operational approval. | ALTCER makes no airworthiness claim. |
Specifications
Technical specifications
| Specification | Value | Condition | Note |
|---|---|---|---|
| Measurement system | |||
| Measurable thickness range | 2 – 60 mm | S355, lift-off up to 2 mm | |
| Measurement accuracy | 0.08 mm | Reference block, lift-off 1 mm | |
| Data | |||
| Data interface | UART, CAN | no condition recorded | Documented message set |
Documentation
Discuss EMALTUS for your asset
Send the material, geometry and access constraints. You get a feasibility answer, including what is out of scope.