Application

Piping

Elevated pipe runs and racks measured without platform build-up.

1920 × 1080 Real photograph of the asset class: Piping The actual structure under inspection, showing the access problem. No stock imagery, no icon in place of a photograph. media placeholder

Conditions

What we are dealing with

Rack geometry makes scaffolding slow and partial.

Asset geometry: Straight runs and elbows, 25 mm diameter and above, on racks up to 18 m.
Typical material: Carbon steel
Typical coating: Painted, insulated sections excluded

Today

Conventional approach

Scaffolding per section, or ultrasonic spot checks from a lift where one fits.

With ALTCER

How we measure it

Approach per pipe segment with the mast angled to the surface normal.

You receive: Per-segment thickness readings with position references.

Demo narrative for layout review. Every condition and limitation on this staging site is invented.

Where this does not apply

Insulated pipework is out of scope. Minimum diameter 25 mm.

Recommended system

960 × 640 Colibri360, real hardware in operation The actual product, photographed in use. No studio render, no CGI. media placeholder

Colibri360

Drone-mounted EMAT thickness gauge with the sensor on a rotary mast, for measuring metal structures without scaffolding or rope access.

2 – 60 mm Measurable thickness — S355, mill scale, lift-off up to 2 mm, 20 °C
0.08 mm Measurement accuracy — S355 reference block, lift-off 1 mm, 20 °C
3 mm Validated lift-off — Coated carbon steel, coating up to 3 mm

Colibri360 details

Discuss Piping inspection

Talk to an Engineer Book a demo